Furnace Maintenance
in North Dallas
A yearly furnace tune-up finds worn parts and safety risks before cold weather. Colony technicians do a full inspection and test for carbon monoxide. After the tune-up, you’ll get a written evaluation. If we recommend repairs, we’ll give you a flat price before starting them. Book in early fall for a timely tune-up. North Dallas homeowners can schedule online or call today.
Get Your Furnace Ready Before the Cold Hits
It's the middle of December, with real cold starting to set in, and your furnace has been shut down since March. You turn up the thermostat and wait, but the heater doesn’t come to life. Now you’re stuck with a cold home until you can locate an HVAC technician.
Furnace maintenance is the best way to prevent this kind of problem. When you get maintenance from Colony Air Conditioning & Heating, one of our technicians will tell you if we find any issues. Colony is family-owned, and our technicians are NATE-certified. We've been delivering comfort your way since 1977. From our home base in The Colony, we serve Frisco, Plano, and the rest of North Dallas.
Why North Texas Homes Need a Yearly Heating System Tune-Up
The National Weather Service reports about 29 freeze days each winter in the Dallas/Fort Worth area, and a furnace breakdown during one of those days is guaranteed discomfort.
Being used all winter leaves wear and tear, and months of sitting unused let dust settle on the burners and in the blower. A tune-up catches these problems early, supporting steadier heat and fewer breakdowns. The furnace may also last longer and cost less to run.
Maintenance can also protect your warranty. Many manufacturers want to see that you have been maintaining your system before honoring a warranty.
What We Check During Furnace Maintenance
Every Colony furnace tune-up follows a checklist built around three goals: keep your family safe, keep the furnace working, and keep it efficient. Here's what we look at and why each item matters.
Safety
This furnace safety inspection comes first because it protects everyone in your home:
- Carbon Monoxide (CO) Test: CO is an odorless and invisible gas. We do a carbon monoxide furnace inspection to make sure none is escaping.
- Heat Exchanger: This component keeps burner flames and exhaust gases away from the air you breathe. We check your heat exchanger for cracks that can let carbon monoxide leak into your home.
- Gas Lines and Pressure: We check for leaks and confirm the gas pressure is correct, so the furnace burns as it should.
- Flue and Draft: The flue carries exhaust outside. We make sure it's clear and that the draft is pulling the right way.
Performance
These checks keep your furnace lighting and heating the way it should:
- Burners: We check for even, clean flames and clear away buildup that can cause uneven heating.
- Ignition or Pilot: We confirm your furnace lights quickly and reliably every time.
- Flame Sensor: This small rod detects whether a flame is burning. When it gets dirty, the furnace can shut itself off mid-cycle, so we clean it.
- Thermocouple: On furnaces with a standing pilot, a thermocouple shuts off the gas if the pilot goes out. We test to ensure this safety measure is working correctly.
- Blower: The blower pushes heated air from the furnace through the ducts of your home. We make sure this is running smoothly.
Efficiency
These checks help keep your furnace from wasting energy:
- Air Filter: A clogged filter makes the blower work harder, which consumes excess energy. We can replace or clean filters.
- Combustion Air: Burners need the right amount of air to burn cleanly. We check that the supply is steady.
- Thermostat Calibration: We confirm your thermostat reads the temperature correctly and calls for heat when it should.
Carbon Monoxide: Why the Safety Check Matters
A gas furnace makes a small amount of carbon monoxide as it burns fuel. This normally vents outside through the flue. A cracked heat exchanger or a blocked flue can release this carbon monoxide into your home.
That's why the safety checks come first on our list. The U.S. Consumer Product Safety Commission recommends a yearly professional inspection of every fuel-burning heating system, and a tune-up is the best way to find these problems before they put anyone at risk. A CO detector is a smart backup, but inspections are also crucial. If your detector ever sounds, or if anyone has symptoms of carbon monoxide poisoning, get everyone outside and call 911.
Signs Your Furnace Needs Service Now
Don't wait for your yearly visit if you notice any of these signs:
- Short Cycling: Your furnace turns on and off every few minutes and never warms the house.
- A Yellow or Orange Flame: A gas burner should produce a steady blue flame. A yellow or orange flame can mean incomplete combustion. This needs to be checked by a qualified technician. Stop using the furnace and contact us for an inspection. If your CO detector sounds or anyone experiences symptoms such as dizziness, headache, or nausea, get everyone outside immediately and call 911.
- A Gas Smell: Leave the house right away and don't try to find the leak. From a safe distance, call 911 and your gas company. If Atmos Energy is your provider, its 24-hour emergency line is 866-322-8667. Call us once everyone is safe.
- Odd Noises: Banging, squealing, or rattling can mean something is loose or worn.
- Rising Bills: A furnace that's losing efficiency works harder for the same amount of heat, which can become expensive.
- Uneven Room Temperatures: Hot and cold spots can point to a worn blower or a clogged filter.
What You Get After the Visit
When we finish, you get a written evaluation of what we checked and what we found, along with our recommendations. Our pricing is flat-rate, so you'll know what any recommended work costs before we start. We only do the work you approve, and we back it with our satisfaction guarantee.
Why Choose Colony for Furnace Maintenance
Choosing us has a lot of advantages. Here's what you get with a Colony tune-up:
- Family Owned Since 1977: Larry Everett opened Colony in The Colony in 1977, and the company has stayed under the same ownership for 49 years.
- NATE-Certified Technicians: NATE certification demonstrates extensive HVAC expertise. It is a voluntary and challenging process, so not every heating technician has it. Ours do.
- Background-Checked Technicians: Our technicians are full-time Colony employees, not subcontractors. Each one has passed a background check and a drug screening.
- Carrier Hall of Fame: Carrier recognizes us as an authorized dealer for its equipment. Carrier inducted our owner, Larry Everett, into its Hall of Fame in 2017.
Keep Up Between Visits
A few simple habits keep your furnace in good shape between tune-ups:
- Check Your Air Filter: Do this monthly, and replace the filter when it looks dirty.
- Keep Vents and Returns Clear: Furniture, rugs, and boxes can block airflow.
- Replace Thermostat Batteries: Swap them before winter if your thermostat uses them.
- Test Your CO Detectors: Press the test button each month and swap the batteries when needed.
Make It Automatic with the Colony Service Plan
Forget to book? Let us remember for you. The Colony Service Plan covers two tune-ups a year (one for heating, one for cooling). We send you reminders so nothing slips. We also put members at the front of the service line. See the plan page for the full details.
Schedule Your Furnace Maintenance Today
Once your furnace has been checked, you can stop wondering whether it will start on the first cold night. One visit gets your system ready for winter, whether you're in Frisco, Plano, Carrollton, or anywhere else in North Dallas. If you'd rather not think about it again next year, the Colony Service Plan sends a reminder when it's time to schedule.